

The
Original PRO-SERIES
"TimBuckTwo
BowCam"
HANDS FREE VIDEO
SYSTEM
High
Quality Digital Video / Audio
420
lines of resolution / 3X, 4 X or 8 X lens
Rechargeable battery with on / off switch
Easy to
set up / Easy to use / Fully adjustable
Only 4
ounces / Quick connection
Wireless is available on all of our systems.
The Pro Series BowCam System $
299.00
This kit includes our Pro Series color
video camera with audio on a fully adjustable mounting bracket, a battery
holder (8"AA") with the pro switch, the 4 X lens, lens cap, full
instructions This kit includes everything you need to connect to your
bow and video recorder.
The Pro Series BowCam System $
329.00
The same kit as above, but with a
rechargeable battery pack, a charger and the 4 X lens. This kit
includes everything you need to connect to your bow and video recorder.
BowCam
PATENT PENDING.
The BowCam comes complete with all the
necessary hardware to connect to your bow and video camera.
Optics
The 4 X lens is a wide angle that is
best suited for close-up hunting. This
will depend on how smooth your bow is and how well you follow through
during and after the shot, but Typically, with some practice, you should
be able to follow your arrow in flight and see where you hit your target
with the 4 X..( results may
vary).
The BowCam comes with a fixed iris mono focal lens that has
an 8x optical view, which is better than most camcorders.
The range of the lens can view hundreds of yards but you get the best
field of view from just a couple of feet out to 100 + yards. All this
without having to adjust the focus.
Lenses are
interchangeable
Recording with the
BowCam
Once the BowCam is connected to your bow
you will have to connect it to a video recorder such as, a camcorder, mini
portable video recorder, or portable V.C.R.'s with analog inputs.
Camcorders with analog inputs are ideal. You can use a light weight
camcorder that you can carry in a fanny pack or camera case. A helpful
list is available to make sure your Camcorder is compatible with our
system. Click
Here

The BowCam mounts to your bow by
inserting the threaded end of the stabilizer, through the mounting hole on
the BowCam Bracket.
Next, tighten the stabilizer onto your
bow and this secures the BowCam.